Discover How To Use The Power of Authority Marketing To Make You Money While You Adventure!

No Experience, Existing Product Or Technical Skills Are Required


We're an affiliate.
We hope you love the products/services we recommend on Just Van Life! So you know, there is the possibility we will collect a commission should you make a purchase via any of our links. This will in no way affect the purchase price. Thank you for your support, we really appreciate it!

If you have ever seen a kitchen or bathroom countertop made out of wood then you know that it takes time and effort to make one. But if you’re looking for something quick and inexpensive then Plywood is a great material to build a countertop out of.

If you want to make a beautiful countertop, you should consider using plywood. This article will show you how to make a countertop out of plywood.

Plywood is a type of wood that has thin layers of veneers glued together. The veneers are usually made of several types of woods such as maple, birch, oak, etc.

You can use plywood to make a countertop because it is strong and durable. You can also use it to create cabinets or other furniture pieces.

In this article, we’ll be making a countertop with plywood. We’ll start off by cutting our plywood into two parts. Then we’ll cut them into smaller rectangles. After that, we’ll sand down the edges of the plywood so they look nice and smooth. Finally, we’ll apply some stain on the top surface of the plywood before applying the finish.


  1. Cut Your Plywood Into Two Parts
  2. Cut It Into Rectangles
  3. Sand Down The Edges Of The Plywood
  4. Stain And Apply Finish
  5. Final Steps

Materials List:

  • Plywood (we used 1/4 inch thick)
  • Mortar
  • Wood Glue

Tools Needed:

  • Jigsaw
  • Hand Saw
  • Chisel
  • Hammer
  • Drill
  • Screwdriver
  • Tape Measure
  • Pencil
  • Clamps
  • Stains
  • Finishes

Let’s get started!

Cutting The Plywood

To begin, we’ll cut our plywood into two equal pieces. First, we’ll measure the width of our plywood. Using a tape measure, measure the length of the plywood.

Now divide the number you got in step 2 by 4 inches. That gives us the amount of cuts needed to split the plywood into two equal parts.

Here’s an example:

Measurement 25″ / 4″ 6.25″ Cuts

So we’ll need six cuts.

Next, we’ll mark the center of each piece of plywood. Use a pencil to draw a line across the middle of the plywood. Now, place a ruler along the drawn lines.

Next, take a chisel and carefully hit the edge of the plywood. Repeat until all six marks are gone.

After that, flip the plywood over onto a flat surface. Put a clamp underneath the back side of the plywood. Place another clamp under the front side of the plywood and lift it up.

This way, the plywood won’t move while you’re working on it.

Using a jigsaw, cut through the clamped area. Be careful not to cut through the marked lines.

Repeat steps 5 and 6 until you’ve finished cutting the plywood into two halves.

Sanding The Plywood

The next thing we’ll do is sand down the edges of our plywood. Start by taking a hand sander and sand the edges of the plywoods. Keep going until you reach the desired thickness.

We recommend starting with 220 grit sandpaper. Once you’ve reached the desired thickness, switch to 180 grit.

Continue doing this until you have no more sand paper left.

Once you’ve finished sanding, let the plywood dry for at least 24 hours.

Staining The Plywood

We’ll now stain the topside of our plywood. Take a small paint brush and dip it into white acrylic paint.

Use a clean cloth to wipe off any excess paint.

Then, take a rag and rub the paint around the entire surface of the plywood. Do this until you see the color change.

When you’re done, let the plywood sit for about 30 minutes. This will allow the paint to fully penetrate the wood.

Apply three coats of polyurethane sealer to protect the wood from moisture and stains. Let the first coat dry completely before applying the second one.

Apply the third coat after 48 hours.

Finishing The Plywood

Finally, we’ll apply a clear coat to give the plywood its final shine.

How To Make A Countertop From Plywood (1)

Take a clean rag and wipe down the top side of the plywood again. Then, use a clean rag to apply some clear polyurethane spray.

Wait for the finish to dry.

How Much Do Plywood Countertops Cost?

Plywood is an extremely cheap material to use for kitchen countertops because it is made out of wood. The main cost will be buying the plywood, but the other costs should also be low.

You can get away with using plywood if you seal it with cutting board oil.

What Is The Best Way To Cut Plywood For Kitchen Cabinets?

If you want to know how to cut plywood, then there are several ways to go about it. Depending on what type of plywood you have, you may need to use a table saw or circular saw. However, if you just want to cut a few pieces, then you can use a simple utility knife. It might seem like a lot of work, but it really isn’t.

How Long Does It Take To Build A Plywood Countertop?

Building a plywood countertop takes anywhere from 2-3 days depending on the size of the plywood. In addition to the time it takes to build the counter top, you will also need to wait for the glue to dry.

How To Install A Plywood Countertop In An RV

Installing a plywood countertop is very similar to installing a laminate countertop. First, you will need to attach the bottom piece of plywood to the floor. Next, you will need to install the middle piece of plywood. Finally, you will attach the top piece to the middle piece.

How To Stain Wood Furniture With Polyurethane Spray

Polyurethane spray is great for staining furniture. It comes in different colors and finishes. You can use it to stain all types of wood including pine, oak, maple, mahogany, cherry, birch, teak, etc.

How To Clean Up After Stained Wood

After you have stained your wood, you will need to clean up the mess. Use soap and water to remove the residue. Once that is done, use a damp cloth to clean up the rest of the mess.

Final Thoughts

Having a plywood countertop in your RV definitely makes storage easier, and makes your RV feel like a home away from home! You don’t need to break the bank either, as DIY countertops are cheap to make – not to mention easy!


Discover How To Use The Power of Authority Marketing To Make You Money While You Adventure!

No Experience, Existing Product Or Technical Skills Are Required


Leave a Comment

Your email address will not be published. Required fields are marked *


Scroll to Top